Fuel

We "strongly recommend" replacing all relevent seals on one bank, even when only changing one injector (unless seals were recently replaced).


		Code:	Application:
		For an injector replacement procedure with 1990-1993 NA and TT injectors:

		14033-	gasket - plenum to intake

		16635-	- upper injector insulator (6 req'd)

		16635-	- lower injector insulator (6 req'd)

		16618-	- lower injector O-ring (6 req'd)

		16618-	- upper injector O-ring (6 req'd)

		8959080	- Nissan high pressure fuel hose (to connect the fuel rails)




		For an injector replacement procedure with 1994-1996 NA and TT injectors:

		14033-	gasket - plenum to intake

		16635-	- upper injector insulator (6 req'd)

		16635-	- lower injector insulator (6 req'd)

		16618-	- lower injector O-ring (6 req'd)

		16618-	- upper injector O-ring (6 req'd)

		8959080	- Nissan high pressure fuel hose (to connect the fuel rails)


		Code:	Application:

		23785-	- Idle Air Control gasket

		14099-	- Hose from Idle Air Control to air regulator

		14099-	- Hose from air regulator to balance tube

		14033-	- Large balance tube O-ring (2 req'd)

		14033-	- Small balance tube O-ring (1 req'd)




		16600-	1990-1993 NA injector

		16600-	1994-1996 NA injector

		16600-	1990-1994 TT injector

		16600-	1995-1996 TT injector

		Injector Upgrades (requires ECU upgrade):
		NISMO 555cc Turbo Injector (1990-1994 300ZX)

		NISMO 555cc Turbo Injector (1995-1996 300ZX)

		NISMO 740cc Turbo Injector (1995-1996 300ZX)