Home S13
1989 - 1994 240SX / S13
HOME >> NISSAN MOTORSPORTS >> 89-94 240SX  
  Click on any of the Nissan Motorsports links below:      
 
Clutch Assembly
The NISMO 225mm clutch cover is rated at 750kg (OE is 450kg/SOHC & 550kg/DOHC). The race clutch disc (9/6-E3040) is a solid-hub bronze button unit designed for competition use only. The Centerforce Dual Friction clutch assembly includes both the clutch cover and disc. The Centerforce clutch cover uses a series of counter-weights to increase (up to 90%) the clamping force as RPM rise. Requires OE T/O bearing (TOBRNG-001/SOHC or 30502-00001/DOHC).
 
»NISMO Clutch Cover - No Longer Available.
»NISMO Disc
»Race Disc
»Centerforce Clutch Assembly
»Aluminum Flywheel
 
Speedometer Pinion
To compensate for tire, wheel or differential gearing changes, an alternate speedo pinion may have to be installed to correct the speedometer. Increase the tooth count on the pinion will decrease the MPH readout.
 
»17t Speedo Pinion (M/T)
»18t Speedo Pinion (M/T)
 »19t Speedo Pinion (M/T)
»20t Speedo Pinion (M/T)
 »21t Speedo Pinion (M/T)
 »22t Speedo Pinion (M/T)
 »23t Speedo Pinion (M/T)

»17t Speedo Pinion (A/T)
»18t Speedo Pinion (A/T)
»19t Speedo Pinion (A/T)
»20t Speedo Pinion (A/T)
»21t Speedo Pinion (A/T)
»22t Speedo Pinion (A/T) - No Longer Available.
 
R200 Limited-Slip Assembly
The R200 L/S assembly is a 4-pinion unit with approximately 70ft/lb breakaway torque. Side gears are 30mm x 29t. All parts listed below the actual L/S assembly are servicing components only.
 
»Limited-Slip Assembly (12mm)
»Slide Gear - No Longer Available.
»Circlip
»Pinion Gear
 »Pinion Shaft - No Longer Available.
»Pressure Ring - No Longer Available.
»Friction Plate (1.75mm)
»Friction Plate / Grooved (1.75mm)
»Friction Plate / Grooved (1.85mm) - No Longer Available.		 »Friction Disc (1.75mm) - No Longer Available.
»Friction Disc (1.85mm)
»Friction Disc / Grooved (1.75mm)
»Friction Disc / Grooved (1.85mm) - No Longer Available.
»Screw
»Spring Plate (1.75mm)
»Spring Disc (1.75mm)
 
R200 Ring & Pinion Sets (12mm)
The ring gear has an OD of 200mm (R200), an ID of 128mm and uses a 12mm ring gear bolt with a 1.25 thread pitch.
 
» 3.700 R&P Set - No Longer Available.
 »3.917 R&P Set - No Longer Available
»4.083 R&P Set
»4.364 R&P Set
»4.636 R&P Set
 
             
 
Click logo to verify

We accept
Payment methods 		 

For info on your order or if you prefer to call to place an order: 1.800.527.1909.
(We are available 9am to 5pm Mon-Fri, 9am to 2pm Saturday CST)

For all other inquires: 1.972.644.3942 You can fax orders to: 1.972.234.4924

We are Courtesy Nissan of Texas, a franchised Nissan dealer offering genuine Nissan parts and much more. Located in Richardson (Dallas) Texas, USA, we ship to most parts of the world.
All parts are for Left Hand Drive U.S. market Nissan models, unless otherwise specified.

Can't find what you want? E-mail us with a description of the parts and we'll e-mail you a quote.
Got a question, phone order, whatever... e-mail us or call.
Planning on visiting our retail store? Print and save on over-the-counter purchases...Click here for details.

Copyright © 1999-2006 Courtesy Nissan, Inc. All rights reserved, all images and content copyright protected and not for use by any other persons or businesses. Availability and prices subject to change without notice.

 

This page last updated on April 13th, 2005.