Home Tony's S14
1995 - 1998 240SX / S14
HOME >> NISSAN MOTORSPORTS >> 95-98 240SX
  Click on any of the Nissan Motorsports links below:    
 
R200 Ring & Pinion Sets (12mm)
The ring gear has an OD of 200mm (R200), an ID of 128mm and uses a 12mm ring gear bolt with a 1.25 thread pitch.
 
  » 3.700 R&P Set - No Longer Available
 »3.917 R&P Set - No Longer Available
»4.083 R&P Set
»4.364 R&P Set
»4.636 R&P Set
 
R200 Limited-Slip Assembly
The R200 L/S assembly is a 4-pinion unit with approximately 70 ft/lb breakaway torque. Side gears are 30mm x 29t. All parts listed below the actual L/S assembly are servicing components only.
 
»Limited-Slip Assembly (12mm)
»Slide Gear - No Longer Available.
»Circlip
»Pinion Gear
 »Pinion Shaft - No Longer Available.
»Pressure Ring - No Longer Available.
»Friction Plate (1.75mm)
»Friction Plate / Grooved (1.75mm)
»Friction Plate / Grooved (1.85mm) - No Longer Available.		 »Friction Disc (1.75mm) - No Longer Available.
»Friction Disc (1.85mm)
»Friction Disc / Grooved (1.75mm)
»Friction Disc / Grooved (1.85mm) - No Longer Available.
»Screw
»Spring Plate (1.75mm)
»Spring Disc (1.75mm)
 
Stabilizer Bar Kits
The stabilizer bar kits are manufactured by Suspension Techniques and include all mounting hardware and urethane bushings. Torsional rigidity is increased by 22% over the 27.2mm OE front bar and 182% over the 15.9mm OE rear bar (SE model).
 
»1-1/8" Bar Kit / F (28.6mm)
»13/16" Bar Kit / R (20.6mm)
 
KONI Shock Absorbers
The KONI sport insert/shock is an adjustable, twin-tube, low-pressure gas units. The front insert is externally adjustable.
»KONI Sport Insert / Front
»KONI Sport Shock / Rear
Eibach Spring Set (Stage I)
Eibach Pro-Kit springs are a direct replacement and will lower the ride height approximately 1.2" (Front) and 1.0" (Rear). The progressively wound springs are rated at 137/228 lb/in (front) and 114/240 lb/in (rear).
 
»Eibach Spring Set (Stage I)
 
Eibach Spring Set (Stage II)
Eibach Pro-Kit springs are a direct replacement and will lower the ride height approximately 1.7" (Front) and 1.4" (Rear). The progressively wound springs are rated at 109/171 lb/in (front) and 114/160 lb/in (rear).
 
»Eibach Spring Set (Stage II)
 
Wheel Studs
Longer studs will allow the installation of spacers and/or certain aftermarket alloy wheels. OE specs are 42mm (F) and 41.5mm (Rear).
»Wheel Stud / Front (50mm)
»Wheel Stud / Front (60mm)
»Wheel Stud / Rear (50mm)
»Wheel Stud / Rear (60mm)
 
 
             
 
Click logo to verify

We accept
Payment methods 		 

For info on your order or if you prefer to call to place an order: 1.800.527.1909.
(We are available 9am to 5pm Mon-Fri, 9am to 2pm Saturday CST)

For all other inquires: 1.972.644.3942 You can fax orders to: 1.972.234.4924

We are Courtesy Nissan of Texas, a franchised Nissan dealer offering genuine Nissan parts and much more. Located in Richardson (Dallas) Texas, USA, we ship to most parts of the world.
All parts are for Left Hand Drive U.S. market Nissan models, unless otherwise specified.

Can't find what you want? E-mail us with a description of the parts and we'll e-mail you a quote.
Got a question, phone order, whatever... e-mail us or call.
Planning on visiting our retail store? Print and save on over-the-counter purchases...Click here for details.

Copyright © 1999-2006 Courtesy Nissan, Inc. All rights reserved, all images and content copyright protected and not for use by any other persons or businesses. Availability and prices subject to change without notice.

 

This page last updated on April 13th, 2005.